Serving Boone, IA & nearby Open 7 days · Mon–Fri 7AM–8PM Licensed & insured · 90-day warranty (844) 442-1999
Call for an upfront quote(844) 442-1999
Serving Boone, IA

Hobart Utensil Washer Repair in Boone, IA

Need Hobart utensil washer repair in Boone, IA? We find the actual cause, explain it in plain terms, give you a price before we start and back the finished repair with a 90-day parts-and-labor warranty.

Call (844) 442-1999 Book online
  • Upfront quote before work
  • 90-day parts & labor warranty
  • Parts matched to your model
  • Same-day service when available

Request service

Tell us what's wrong. We'll call you back to schedule.

We only use your details to arrange the repair. No spam.

or call now
(844) 442-1999
Licensed & insuredFully insured technicians
90-day warrantyOn parts and labor
Upfront pricingApprove the price first
248 appliance types426 brands serviced
Hobart specialists

Repairing Hobart Utensil Washers

Hobart utensil washers use model-specific control boards, sensors and wiring layouts, so we start by reading the model and serial number from the rating label. That tells the technician which parts fit and whether any service bulletins apply to your unit.

How we repair your Hobart Utensil Washer

A utensil washer is a commercial machine that cleans and sanitizes silverware, small tools and trays, often with baskets that tumble or soak items before rinsing. Every utensil washer uses a water inlet valve, a wash or circulation pump, spray arms, a heater, a drain pump and a control with sensors. A technician checks fill, wash, heat and drain steps one at a time to find the failed part.

Commercial dishwashers must hit sanitizing temperatures for health code compliance, so a failed heater or booster is a priority call.

Hobart Utensil Washer repair at a glance

  • Typical repair cost$150–$400
  • Typical service life9–12 years
  • Warranty on repairs90 days parts & labor
  • QuoteUpfront, before work
  • Same-day visitsWhen available
Call (844) 442-1999
Diagnosis

Common Hobart Utensil Washer problems we fix

What usually causes each symptom, and what our technician checks to confirm it.

Unit does not fill

Likely causes
A closed supply valve, a clogged fill strainer or a failed fill solenoid.
What our technician checks
Supply pressure, strainer and solenoid are tested.

Small items lost in the drain

Likely causes
A missing or damaged strainer or baskets that are not seated.
What our technician checks
The strainer and basket fit are inspected and the drain is cleared.

Soak tank foams over

Likely causes
The wrong detergent, too much product or food protein buildup.
What our technician checks
Detergent type and dose are checked and the tank is drained and cleaned.

Water will not heat

Likely causes
A failed heater, a bad thermostat or a level probe that does not sense water.
What our technician checks
The heater, thermostat and probe are tested.

Basket rotation or agitation stops

Likely causes
A failed drive motor, a broken coupling or a jammed basket.
What our technician checks
The motor, coupling and basket bearings are inspected and tested.

Silverware comes out spotted

Likely causes
Low rinse temperature, missing rinse aid, hard water or overloaded baskets.
What our technician checks
Rinse temperature, rinse aid feed and water hardness are checked.
Before you call

Quick checks you can do safely

  • Do not overfill utensil baskets.
  • Check that the drain strainer is in place.
  • Confirm detergent and rinse aid supply.
  • Seat baskets fully before starting.
  • Open the water supply valve fully.

Safety first: Allow hot water and baskets to cool before handling, and keep hands away from moving baskets.

Still not working?

Call and describe what you see and hear, plus any error code. It helps the technician bring the right parts on the first visit.

(844) 442-1999

Seeing a code? Try our error code lookup or troubleshooting wizard.

How it works

Our 5-step utensil washer repair process

  1. Call or book onlineTell us the appliance, brand and what it is doing. We confirm a visit window that works for you.
  2. DiagnosisThe technician inspects and tests the utensil washer to find the actual cause, not just the symptom.
  3. Upfront quoteYou get a clear price before any work starts. No surprise charges.
  4. RepairWe fix it with parts matched to your model, often on the same visit when the part is on the truck.
  5. Test and warrantyWe test the unit under normal operation, clean up and back the repair with a 90-day parts-and-labor warranty.
Pricing

Hobart Utensil Washer repair cost and lifespan

Typical repair cost$150–$400
Typical service life9–12 yrs

National ballpark estimates. Your exact price depends on the part and labor, and you get it upfront after diagnosis. On the fence? Try the repair vs replace calculator.

Parts we replace most often

  • Drive motor
  • Basket coupling
  • Heating element
  • Thermostat
  • Fill solenoid valve
  • Drain strainer
  • Level probe

We match every part to your model and serial number.

Maintenance

Keep your Hobart Utensil Washer running longer

  • Drain and clean the tank daily.
  • Keep the strainer clean and in place.
  • Inspect baskets for broken wires that snag items.
  • Delime regularly in hard water areas.
  • Check rinse temperature each shift.

Build a maintenance plan

Create a printable monthly, quarterly and yearly checklist for every appliance in your home.

Open the schedule generator
Local service

Hobart Utensil Washer repair in Boone, IA

Cold winters, humid summers and hard water in Iowa take a toll on water heaters, dishwashers and laundry machines in Boone.

We provide utensil washer repair throughout Boone, including ZIP codes 50036, 50037 and 50099, and in nearby Ogden, Madrid and Ames.

Hard water is common across much of Iowa; where it is, minerals build scale on heating elements, valves and spray parts, so descaling and filter changes matter more.

Also serving nearby

Brands

Utensil Washer brands we repair

FAQ

Frequently Asked Questions

How much does Hobart utensil washer repair cost in Boone, IA?

Most Hobart utensil washer repairs fall roughly between $150 and $400, depending on the part and labor involved. That is a national ballpark estimate; you get an exact quote after diagnosis and before any work starts.

Can you repair my Hobart utensil washer the same day?

Often, yes. Call (844) 442-1999 early in the day and we will try to schedule a same-day visit. Same-day service depends on technician availability and whether the part is in stock.

Is the repair guaranteed?

Yes. Completed repairs are covered by a 90-day parts-and-labor warranty. If the same problem comes back in that time, we come back and fix it.

Which brands do you service?

We work on all major brands, including Champion and Hobart.

Should I repair or replace my Hobart utensil washer?

A typical Hobart utensil washer lasts about 9 to 12 years. If yours is well within that range and the repair costs less than half the price of a new one, repair is usually the better value. Our technician will tell you honestly if replacement makes more sense.

Related

Other dishwashers repairs

More repair services

Get your utensil washer fixed in Boone

Upfront quote before work starts · Parts matched to your model · 90-day warranty

(844) 442-1999 Book online
Call now Book